Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | K | O | S
Number of items at this level: 15.

A

Ajibola, W.A and Dada, A.A and Amori, A. A (2018) MICROSTRUCTURAL STUDIES AND CHARACTERIZATION OF ZINC ALUMINIUM ALLOY REINFORCED WITH ALUMINA AND COCONUT SHELL ASH. International Journal of Scientific Engineering and Applied Science (IJSEAS), 4 (7). pp. 86-96. ISSN ISSN: 2395‐3470

Ajibola, W.A and Fakeye, A.B (2016) Production and Characterization of ZincAluminium, Silicon Carbide Reinforced with Palm Kernel Shell Ash. International Journal of Engineering Trends and Technology (IJETT), 41 (6). pp. 318-325. ISSN 2231-5381

Amosun, S.T and Adebesin, A.A (2020) Performance Evaluation of A Run-Flat Tyre. International Journal of Modern Trends in Engineering and Research, 7 (4). pp. 11-16. ISSN 2349-9745

B

Babatunde, A. F and Sunday, O. O (2018) A Review of Working Fluids for Organic Rankine Cycle (ORC) Applications. IOP conference series :materials science and engineering, 4 (13). pp. 1-13.

D

DADA, Aderemi and AJIBOLA, Wahab (2019) EXPERIMENTAL ANALYSIS OF METAL MATRIX COMPOSITE REINFORCED WITH SUGARCANE BAGASSE ASH. International Journal of Modern Trends in Engineering and Research, 6 (2). pp. 13-28. ISSN 2393-8161

K

Kehinde, O and Omotosho, O.A and Ohijeagbon, I.O (2019) THE EFFECT OF VARYING SAND AND PLASTIC ADDITIVES ON THE MECHANICAL PROPERTIES OF CEMENT MATRIX TILES. In: 3rd International Conference on Engineering for a Sustainable World (ICESW), 2019, Covenant University.

Kehinde, O and Omotosho, O.A and Ohijeagbon, I.O (2019) IMPACT OF VARYING LATERITE AND COWHORN ADDITIVES ON THE MECHANICAL PROPERTIES OF CEMENT MATRIX PLASTIC TILES. In: Raising a new Generation of Leaders, 2019, Department of Mechanical Engineering.

Kehinde, Oluyemi and Babaremu, Kunle and Akpanyung, K.V and Remilekun, Elewa and Oyedele, S.T and Oluwafemi, J (2018) RENEWABLE ENERGY IN NIGERIA- A REVIEW. International Journal of Mechanical Engineering and Technology, 9 (10). pp. 1085-1094. ISSN 0976-6359

Kehinde, Oluyemi and Ramonu, John (2020) Plastic Wastes: An Environmental Hazard and A Solution to Wealth Creation in Nigeria. In: School of Engineering 4th National Conference, 2020, The Federal Polytechnic Ilaro, Ogun state.

Kehinde, Oluyemi and Ramonu, John and Babaremu, Kunle and Justin, Lazarus (2020) Plastic wastes: environmental hazard and instrument for wealth creation in Nigeria. Heliyon, 6 (10). pp. 1-7. ISSN 2405-8440

Kehinde, Oluyemi and Sunday, Babatunde (2020) Styrofoam Food Packs: The Controversy Between Being a Daily Necessity and an Environmental Hazard. In: 2 nd International Conference, The Federal Polytechnic Ilaro, Ogun state.

O

Olubodun,, M.E and Adebayo, F.T (2017) Development of Megacities in Emerging Economies: Challenges and Prospects. CARD International Journal of Social Sciences and Conflict Management, 2 (3). pp. 29-46. ISSN 2536-7234

S

Sunday, Afolalu and Enesi, Salawu and Kehinde, Oluyemi and Samuel, Ayuba and Ikechi, Ihebom and Remilekun, Elewa (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 3 (4). pp. 65-68.

Sunday, Afolalu and Ikechi, Ihebom and Remilekun, Elewa and Samuel, Ayuba and Kehinde, Oluyemi (2018) HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW. International Journal of Advanced Research, 3 (6). pp. 770-773. ISSN 2320-5407

Sunday, Afolalu and Samuel, Ayuba and Ikechi, Ihebom and Remilekun, Elewa and Kehinde, Oluyemi (2018) ROLE OF RELIABILITY MANAGEMENT TOOLS AND DOCUMENTATIONS- A REVIEW. Global Journal of Engineering Science and Research Management, 5 (3). pp. 39-42. ISSN 2349-4506

This list was generated on Sat Mar 6 15:23:11 2021 UTC.